Use of technology: 
 A clean surface: sticky or coated material surfaces clean and remove rust, dirt and oil. 
 Sizing: Unscrew the hose cap (or cut open), glue pushed the clean surface, so that distribution, will be glued surfaces together and fixed. 
 Curing: will be glued or sealed parts in the air allowed to naturally curing. The curing process is the one from the surface to the internal curing process, within 24 hours (at room temperature and 55% relative humidity) and the glue will solidify the depth of 2 ~ 4mm, if the position is deep, especially in not easily accessible to the site of the air, fully curing time will be extended if the temperature is low, the curing time will be extended. Parts prior to packaging for further processing or to be bonded, it is recommended users wait for a long enough time so that the bonding solid and integrity are not affected. 

 Fourth, note: 
 Operation is complete, unused plastic immediately tighten the cap, sealed and stored. Used again, if the seal a little knot 
 The skin, removal can not affect the normal use. Gum during storage, the canal orifices may appear a small amount of the curing phenomenon will be cleared normal use, does not affect product performance. 

 Before and after curing parameters: 
 Performance indicators 386T 386W 386B / gray 386Z 
 Solid 
 Of 
 Before the appearance of transparent paste white cream black / gray pasty white paste 
 The relative density of 
 (G/cm3 at 25 ° C) 1.04 1.20 1.20 1.30 
 Surface drying time (min, 25 ° C) 10 to 20 10 ~ 20 5 ~ 10 10 ~ 20 
 Full curing time (d, 25 ° C) 3 7 3 7 3 7 3 ~ 7 
 Curing type single-component 
 Off oxime single component 
 Off oxime single component 
 Off oxime single component 
 Off ketone oxime type 

 Solid 


 Of 


 After the hardness (Shore A) 20 ± 2 40 ± 2 40 ± 2 50 ± 2 
 Tensile strength (MPa) 2.0 ± 0.2 2.5 ± 0.2 2.5 ± 0.2 2.0 ± 0.2 
 Shear strength (MPa) 2.0 ± 0.2 2.6 ± 0.2 2.6 ± 0.2 2.0 ± 0.2 
 Elongation at break (%) 300 400 250 350 250 350 200 300 
 Peel strength (N / mm)> 5> 6> 6> 5 
 Operating Temperature Range (℃) -60 ~ 200 -60 ~ 260 -60 260 -60 ~ 260 
 Volume resistivity (Ω · cm) ≥ ≥ 2.0 × 1016 2.0 × 1016 ≥ 2.0 × 1016 ≥ 2.0 × 1016 
 Dielectric Strength (kV / mm) ≥ 20 ≥ 18 ≥ 18 ≥ 18 
 Dielectric constant (1.2MHz) 2.8 2.9 2.9 2.9 
 Flammability rating / / / 94-V0 
 All mechanical and electrical performance at 25 ° C, relative humidity 55%, measured 7 days after curing. 

 Packaging Specifications: 
 Of 100ml / 100 / box; 300ml / 24 / Box 
 Storage and transport: 
 A storage period of 9 months (25 ° C). 
 2, such products are non-dangerous goods according to transport as common chemicals. 
 More sealant details, please contact with Granville Chile Suzhou 0512-68380467 Website: http://www.weizhili.com QQ: 1324213864